Proper  installation    B&G GLASS  Reading PA   610.372.7868   800.373.7869

Be sure your glass shop follows these 17 steps when installing your windshield ...

...and uses "2" technicians to install.  If only one technician installs your windshield, you have an increased possibility of having your paint scratched, windshield broken or not being set correctly in the pinch weld.

1. Inspect vehicle for any pre-existing damage
2. Protect all vulnerable areas of the vehicle prior to work
3. Remove moldings, wipers, cowl, & trim from the windshield
4. Cut broken windshield from the pinch weld and remove
5. Trim existing urethane bead to 1/16 inch thickness:
Full Cut Technique
6. Position windshield in dry opening
7. Apply pinch weld primer to pinch weld surface
8. Clean inside of replacement windshield
9. Apply glass prep to windshield perimeter
10. Apply primer to windshield perimeter
11. Select proper adhesive (urethane) *& apply to pinch weld
(*based on temperature, humidity, airbag, out of service time available)
12. Set windshield onto adhesive, level, and center the unit
13. Reset the trim molding
14. Reinstall wipers, cowl, & other items detached during glass removal
15. Test for leaks
16. Inspect & clean vehicle
17. Keep vehicle out of service until safe drive away time is obtained

 

B&G is your local PPG ProStars affiliate

PPG ProStars Logo

 

Related Products
& Services

■ stone chip repairs
■ ProStars
■ warranty
■ insurance claims
■ auto glass safety
■ AAA
■ mirrors
■ OEM glass
■ maintenance

All Departments

■ Residential
 ■ Automotive
 ■ Commercial
 ■ Specialty

Questions?

■ re: proper installation
■ Contact - General Info
■ Get Quote

PPGlogoB&GGlass

B&G Glass
1440 Carbon St.
Reading, PA 19601
610-372-7868
800-373-7869